How to align sundirect dish--> Malaysia

[sshaik]

Hi all,
I bought SUNDIRECT dish from India and take back to my country Malaysia, I need someone help to guide me how to align properly in order to get the signal. Let me explain something, I had activate and used this decorder in India before take back to Malaysia.

The error shown : E48 No signal & E52 Searching for signal

By using the http://www.n2yo.com/?s=30793 I manage to get the azimuth and elevation at my present area, but still can't received the signal.
My current location: Malaysia
Latitude: 5.1653°
Longitude: 100.1428°
Azimuth : 232.3
Elevation : +80.09

Another my bad time was I left the remote control at India and it on way to Malaysia not sure when I will received ! But I confident my previous setting in India (done by SUNDIRECT installer).

I really apperieciate if someone able to help me ! Thanks in advance !

[Dish]

Well Sun DTH is on Insat 4B at 93.5E. So try to move dish towards East direction and try to get siganls. Once you get 20% up then it is easy for you to get it better.

[sshaik]

Thanks for reply,infect i had spend whole day to adjust the dish around the area, did i need to change any setting in the decoder ?

(09-09-2008 02:51 PM)Dish Wrote:  Well Sun DTH is on Insat 4B at 93.5E. So try to move dish towards East direction and try to get siganls. Once you get 20% up then it is easy for you to get it better.

[Dish]

No you not need to make any changes in STB right now. Just check signal level. Also I suggest to contact http://www.saveondish.com/forum/member.p...e&uid=1659 as he has good information regarding this as Sun DTH is not launched Nation wide.

I guess something wrong in signals.

[sshaik]

I also have Malaysia DTH called as ASTRO where the sat is Measat 3, the location also alomost close to INSAT4B, really confuse....already send message to Satish too.

Since i don't have the remote, i depend on the screen whether the picture apper or not only ...

Worry some thing goes wrong but confirm all the connection are good...

(09-09-2008 03:09 PM)Dish Wrote:  No you not need to make any changes in STB right now. Just check signal level. Also I suggest to contact http://www.saveondish.com/forum/member.p...e&uid=1659 as he has good information regarding this as Sun DTH is not launched Nation wide.

I guess something wrong in signals.

[Dish]

Yes Astro and BIG TV is on same satellite MeaSat 3. Now you don't have Remote which is a problem. Try to find Remote in shop I am sure someone have it. What's your Model of STB?

[sshaik]

STB : SN9000IR

Already find , can't get the remote in Malaysia

(09-09-2008 03:25 PM)Dish Wrote:  Yes Astro and BIG TV is on same satellite MeaSat 3. Now you don't have Remote which is a problem. Try to find Remote in shop I am sure someone have it. What's your Model of STB?

[Dish]

Then you needs to join other STB to check signal level, if possible find any FTA STB and find signals on it. It will help you better way.

[sonu]

(09-09-2008 03:28 PM)sshaik Wrote:  STB : SN9000IR

Already find , can't get the remote in Malaysia

(09-09-2008 03:25 PM)Dish Wrote:  Yes Astro and BIG TV is on same satellite MeaSat 3. Now you don't have Remote which is a problem. Try to find Remote in shop I am sure someone have it. What's your Model of STB?

how much % signal getting from measat 3

because i m living in the middle east . i need big tv . it is also on measat 3

[sshaik]

Sorry... I quite new to this forum, what u mean by join other STB ? can i connect my dish in to sundirect and the loop to ASTRO ?

(09-09-2008 03:33 PM)Dish Wrote:  Then you needs to join other STB to check signal level, if possible find any FTA STB and find signals on it. It will help you better way.